HT TEX Textile Hardness Tester
This can be used to measure winding density(hardness) of textile bobbins, beams, spools, cones, dye packages, etc.
Features:
§
Convertible
probe, curved for bobbin <400mm diameter, flat end for bobbin >400mm
diameter.
§
Different
indenters with 2.5mm/ 5mm/ 10mm diameter for various hardness
§
Avg
calculations and max data hold
§
Optional
Data logging
Applications:
This can be used to measure winding density(hardness) of textile bobbins, beams, spools, cones, dye packages, etc.
Measuring Principle:
This
works on spring load and penetration depth principle, where the resistance
force from the penetration against the sample is measured to estimate the
hardness. Similar principle to Shore hardness testing of rubbers.
|
Model |
Metrix+ HT TEX 2P5 |
Metrix+ HT TEX 5 |
Metrix+ HT TEX 10 |
|
Indenter |
Ball 2.5mm diameter |
Ball 5mm diameter |
Ball 10mm diameter |
|
Application |
For closely wound bobbins of
synthetic, finished fibers and filaments |
For loosely wound bobbins of
synthetic fibers and closely wound natural fibers, yarns and threads |
For very loosely wound bobbins of thick
yarns, such as carpet yarns |
|
Convertible
probe |
Curved end is used for bobbin
diameter <400mm (working face 55mm diameter) Flat end is used for bobbin diameter
>400mm (working face 45mm diameter) |
||
|
Measurement
range |
10 ~ 90H, display range is 0 ~ 100H |
||
|
Resolution |
0.1H |
||
|
Accuracy |
+1H |
||
|
Testing
parameters* |
Depth of Indentation 0~2.5mm, Test pressure
~12.5N, Measuring spring force: 0.55~8.065N |
||
|
Operating conditions |
Temp: 0~40C, Humidity <80% RH |
||
|
Dimensions |
177 x 65 x 45mm, approx. 285g |
||
|
Power Source |
2 x 1.5V AAA batteries |
||
|
Std
accessories |
Main unit, pins, screwdriver, manual, case |
||
|
Optional
accessories |
Data logging: PC interface (USB &
software), Bluetooth |
||
| Catalogue: | Catalogue |
